Fanuc 21i-T control, PCMCIA flash card interface, 5,000 RPM, 5 HP main spindle with Big Bore option, 4" chuck and 16C collet ready spindle. Overall axis repeatability of .000015" and .000010" resolution and offset control allow for "super precision" turning and achieving an 8 micro-inch finish. Pre-tooled, quick change tooling plates allow for quick change over with repeatability of .0002".
3,400 RPM, 30 HP main spindle with 3” bar capacity, 10” chuck and 4,000 RPM, 8 HP sub spindle with 5”chuck and 10 position VDI turret. Live tooling with high power option giving 7.5 horsepower for milling and drilling. Cutting capacity of 16” x 34” with chuck air blast and high pressure coolant. Haas brushless magazine bar feeder and interface.
4,000 RPM, 20 HP spindle with 8.3” (210 mm) chuck and 10 position turret. Cutting capacity of 10.3” x 20” and swing diameter 23”. Positioning accuracy ±0.0002,
repeatability ±0.0001.
PC based Fusion control with PCMCIA computer interface. 10” diameter main spindle chuck and 6” sub-spindle chuck, with milling options, full C-axis on main chuck. Maximum capacities are 11.75” diameter, 20” cutting length, rapid traverse 1,180 IPM and spindle speeds of 4,000 RPM. The shuttling dual chuck design and live tooling options offer the capability of milling, drilling and tapping your parts complete. This machine is equipped with a gantry robot for loading, unloading and transferring of parts between spindles offering many opportunities for unattended machining on large
production runs
T-Plus Control with a high-speed 32-bit CPU High speed, 32-bit CPU, 10” diameter main spindle chuck and 6” sub-spindle chuck, 2.520” diameter through spindle, with milling options, full C-axis on main chuck. Machine is equipped with a 2 ½” maximum LNS bar feed. The shuttling dual chuck design offers the capability of milling, drilling and tapping your parts complete. Maximum capacities include: 11.75” diameter, 2.5 through spindle bar diameter, 20” cutting length, rapid traverse 1,180 IPM and spindle speed of 4,000 RPM.
T-32 Plus Control with a high-speed 32-bit CPU High speed, 32-bit CPU, 6” chuck, 1.575 diameter through spindle, twelve-position turret, programmable tail stock and tool setting gage. Unidirectional repeatability, X-axis ±0.00007”, Z-axis ±0.00011”, fully automatic tool wear compensation and breakage detection. Maximum capacities include: 6,000 RPM, 10 HP spindle, rapid traverse X-1,300 IPM, 8” cutting diameter and 12” cutting length.
T-32 Control with a high-speed 32-bit CPU, 8” chuck, 4,500 RPM, 20 HP, 2.047 diameter through main spindle, twelve position turret, flexprint option, programmable tail stock and tool setting gage. Unidirectional repeatability, X-axis +/-0 .00008”, Z-axis
+/- 0.00012”, fully automatic tool wear compensation and breakage detection. Maximum capacities include: rapid traverse X and Z of 1,180 IPM, 14” cutting diameter, 19” cutting length and equipped with a high pressure coolant system.
Each machine has a T-32 Control with a high-speed 32-bit CPU,
6” chuck, 10 HP spindle, rapid traverse X and Z of 1,180 IPM,
8” cutting diameter, 12” cutting length, LNS Super Hydrobar HS bar feed with a stock range of 1/16” to 1 1/2” and equipped with a high pressure coolant system.